.gif)
View Printable VersionSaw Selection GuideUse this tool to help you decide on the Kaltenbach Circular Cold Saw or Horizontal Band Saw that best fits your needsUse the Guide Now!
KKS 400/450 Universal Semi-Automatic Circular Cold Saw
.jpg)
KKS 450 Circular Cold Saw
Robust, miter-cutting circular cold saw machines primarily for ferrous (but also non-ferrous) metals. 180° miter range with hard stops at 45° - 90° - 45°. KKS metal cutting saws are widely used in fabrication work and wherever fast, clean, accurate, straight and miter cuts are needed on small-to-medium structural sections and solids.
.jpg)
Setting the miter angle
The Kaltenbach up-stroking blade principle provides several key advantages:
- The blade immediately enters the cut for reduced cycle time
- Coolant is applied to the blade below the table for less mess
- Safe set-up with all the saw gear components located below the table
- Long blade life due to rigid feed stroke and no re-cutting of chips
.jpg)
Vertical and horizontalclamping
Ease of set-up and use combines with durability and long-term reliability. Tens of thousands of KKS cold saws have been supplied worldwide.
Productivity and efficiency are enhanced with the use of our T3 Handling Equipment. Adding input roller conveyor and length measuring equipment create the ideal metal sawing cell.
Kaltenbach also offers customized KKS machines for bent tube applications. See our KKS 400/450 Specialty Machines for Exhaust Mfgrs page for more details..jpg)
Cutting a wide rangeof sections & solids
Technical Data
| KKS 400 E | KKS 450 E | KKS 400 H | KKS 450 H | ||
|---|---|---|---|---|---|
| Saw Blade | DIA | 15.75" (400mm) |
17.72" (450mm) |
15.75" (400mm) |
17.72" (450mm) |
| Std. Power | HP | 2.3/3.5 | 2.3/3.5 | ||
| high speed option | HP | - | 5.0/6.0 | ||
| freq. drive option | HP | - | 5.4 | 5.4 or 7.4 | |
| Std. Cutting Speeds | SFM | 40/80 to 60/120 | 40/80 to 60/120 | ||
| high speed option | SFM | - | 120/240 | 140/280 | |
| freq. drive option | SFM | - | 23-141 or 65-311 | 23-141 or 49-246 | |
| Weight | LBS | 1,800 | 2,100 | 1,900 | 2,300 |
| Dimensions | INCH | 35 x 44 x 70 | 40 x 44 x 78 | 35 x 46 x 70 | 40 x 52 x 78 |
Cutting Capacities
| KKS 400 E/H | KKS 450 E/H | ||
|---|---|---|---|
| Round | 90/45 | 5.1" | 5.9" |
| Square | 90 | 4.7" | 5.5" |
| 45 | 4.3" | 5.1" | |
| Rectangle | 90 | 12.0" x 0.8" | 13.0" x 1.5" |
| 45 | 9.6" x 1.1" | 9.8" x 1.5" | |
.gif){kind=small}